Mielke's
Fiber Arts, LLC Your Central Wisconsin source for weaving,
spinning, knitting, crocheting, tatting, bobbin lace, felting, dyeing, and
locker hooking equipment, books, and supplies.
Pro Felter Elite
The Pro Felter Elite features a lightweight nickel-plated body that unscrews for easy needle changing,
with a snug fit to prevent needle movement. It is 3” long, designed for heavy-duty use, and self-stores additional needles for your convenience. Best of all, it won’t roll off the table!
The Pro Felter Elite is packaged with the sharp end of needle inside to protect the needle during shipping. To switch needle ends, grasp tool firmly in center with thumb and forefinger and loosen by ¼ turn. Once the chuck is loosened, pull the needle out, invert it and tighten the chuck. Do not remove the chuck.
Needle Storage: Holding the tool in the center, unscrew the textured section near the
top. The tool will open, exposing the needle chamber with the replacement needles.
FeltCrafts
2-Needle Tool Hand tooled aluminum. Holds two felting needles. Twists
apart easily to change needles and has a removable chain. Two needles
included.
Clover Pen Style Needle Felting Tool The Pen Style Needle Felting Tool allows application of small or delicate
materials using one, two, or three needles. The tool can be adjusted to two
depths of needle penetration that can be used with the Needle Felting Molds
(sold separately) for creating 3-dimensional designs and appliqués. The handle
offers ease of use because of the "Pen Style" grip action. Easy
replacement of various gauges of needles.
Short-Needle Three Prong Punch Needles 1" long. Approximately 4 1/2" overall
length.
Replacement Short Needles for Three Prong Punch Use a needle nose pliers to pull out the old needles and push in the new.
Package of five needles. Available in 32 or 36 gauge. $6.00
Clover 5-Needle
Felting Tool A nifty new dry felting tool from Clover. Clear plastic
spring-activated needle guard protects fingers. Guard can be
"locked" when the tool is not in use. Works with one to five
needles. Comes with five needles, which are easily exchanged or replaced.
Clover Brush Mat
A sturdy, permanent brush-style mat used as a platform for needle
felting. Designed for use with the Clover
Felting Tool (see above). Available in two sizes:
Small Brush Mat, 2.7" x 3.5"
Large Brush Mat, 3.25" x 5"
Higgs Needle Felting Tools From Suzanne Higgs, the inventor of the foam hat and purse
forms. Use a screwdriver to remove the wood screw, and you can change or
replace the needles. Each tool comes filled with 38 gauge needles. Please
note: Due to the wood screw being simply screwed into the wood of the handle
(rather than a threaded metal base) these tools do have a limited number of
times that they can be opened for needle replacement before the wood will strip.
Eight Needle Multi-Tool
We are excited to be able to offer these economical tools from Rita Blocksom.
The tools are designed
to hold up to eight felting needles, but can be modified for fewer needles by unscrewing the ball top to access the needle “angles” and removing
some needles. The best part is that no screwdrivers or tools are required to access
needles - easier and safer for you, and it prolongs the life of the tool! 1 1/2”
ball top wooden handle with metal screw and threading inserts. Comes filled with 38 gauge triangle needles.
FeltCrafts Multi-Needle Tool
Holds up to six felting needles in a circular pattern. Twists apart for easy needle
changing. Each tool is unique, and hand tooled of light weight
aluminum. Comes in protective plastic case. Eight all-purpose
needles included.
Inline Nine
This tool is particularly useful in landscape design and geometric work. It is three inches long and has nine
short needles. Each needle can be individually removed/replaced by using the
supplied allen wrench to loosen the screw at the top of the needle. Nine
short 38 gauge triangle needles included.
FeltCrafts
10-Needle Tool
Lightweight, hand-tooled aluminum. Holds ten needles in a row (straight
line). Change needles easily using a Philips head screw driver. Ten
needles included.
FeltCrafts
20-Needle Tool
Lightweight, hand-tooled aluminum. Holds twenty needles in a bull's eye
pattern. Ridged base also works
as a wet felting tool when the needles are removed. Twenty 38 gauge triangle needles included.
Mielke's
Fiber Arts, LLC
