Mielke's
Fiber Arts, LLC
Your Central Wisconsin source for weaving,
spinning, knitting, crocheting, tatting, bobbin lace, felting, dyeing, and
locker hooking equipment, books, and supplies.
|
|
|
Home
PRODUCTS
|
Schacht Low Castle Jack Looms
(Four shaft shown in maple. Lamp not included - lamp holder optional, see below) Schacht's Standard floor loom comes in two styles: The Standard Low Castle and the Standard High Castle. Though both looms take up identical floor space, the lower profile of the Low Castle model appears visually smaller. All Standard floor looms may be ordered with eight or Four Now-Four Later shaft options. The number of shafts you choose will depend on the kind of weaving you intend to do. Though most weave structures can be woven on four shafts, additional shafts increase your pattern options extensively. If you have a keen interest in pattern drafting and weave structures, eight shafts will allow you to fully develop this interest. The Schacht Standard floor loom has an under-slung jack mechanism to raise the shafts. The jacks pivot from two points equidistant from the center and lift the shafts by pushing up on the center point. Schacht employs a parallel lamm system which gives their looms a light treadling action. Because of this parallel lamm, it isn't necessary to adjust the tie-up cords. The tie-up system is quick and easy to use. Pre-measured nylon tie-up cords hang from the lamms and are attached to a treadle by sliding the appropriate cords into the treadle slot. This makes changing tie-ups very fast. Other special features of the Schacht Standard floor loom includes: friction reducing aluminum shaft channels, a back beam which folds with or without a warp on the loom, removable back and breast beams, and an adjustable open-sided beater. The braking system employs a ratchet and dog on the cloth beam and a friction brake on the warp beam. This combination give you precise tension control at all times. Available in 36" or 46" weaving widths, 4 or 8 shafts, maple or cherry . 36" 4 Now - 4 Later, maple...$2,495.00 or cherry...$3,100.00 46" 4 Now - 4 Later, maple...$3,162.00 or cherry...$3,845.00
-shown with optional bench bags- Schacht Loom Benches Prices: Loom bench bag, maple...$42.75 per bag
S tandard Jack Loom Options Extra Treadle Options 10 treadles for 36" or 46" four shaft maple...$80.00 10 treadles for 36" or 46" four shaft cherry...$92.00 12 treadles for 46" four shaft maple...$144.00 12 treadles for 46" four shaft cherry...$155.00 12 treadles for 46" eight shaft or 4-now/4-later maple...$123.00 12 treadles for 46" eight shaft or 4-now/4-later cherry...$134.00
Four-Later Shaft Kits 4 later kit - 36" maple (need serial #)...$751.00 4 later kit - 36" cherry (need serial #)...$80500 4 later kit - 46" maple (need serial #)...$762.00 4 later kit - 46" cherry (need serial #)...$890.00
Standard Loom Sectional Warp Beams 36" sectional beam, maple (need serial #)...$203.00 36" sectional beam, cherry (need serial #)...$221.00 46" sectional beam, maple (need serial #)...$232.00 46" sectional beam, cherry (need serial #)...$247.00
Standard Double Back Beams 36" double back beam, maple (need serial #)...$529.00 36" double back beam, cherry (need serial #)...$568.00 46" double back beam, maple (need serial #)...$548.00 46" double back beam, cherry (need serial #)...$597.00
Lamp Holders Wood piece only - does not include lamp. Maple lamp holder...$18.00
Reeds - Click Here. Replacement and Repair Parts - Click Here.
URL for this page: http://www.mielkesfiberarts.com/schacht/sch_lwcs.htm
|
|
[Home] [Useful
Information] [Site
Map] [What's New]
[Order] [Shipping]
[Classes]
[Contact Us] prices subject to change without notice, due to manufacturer's
price changes Mielke's Fiber Arts, LLC 3086 Co. Rd. PP
Rudolph, WI 54475
|
